How to draw a room by size
In short
Tap Room in the floor plan toolbar, choose Draw It and tap Next. Pick a shape, drag the corners or tap a side to type its length, fill in the details, then tap Add to Floor Plan.
Draw a room
- Open a project and tap Room in the toolbar. On a Mac you can also use Add Room in the menu bar (Cmd-N).
- Choose Draw It and tap Next.
- On Room Shape, pick Rectangle, Square, L-shape, U-shape, T-shape or Custom, then tap Next.
- On Room Size, drag a corner, or tap a side's length to type it. The rotate button turns the shape a quarter turn. Tap Next.
- On Details, type a name or tap a suggestion like Kitchen or Bedroom, and check Wall Height and Wall Thickness.
- Tap Add to Floor Plan. If the floor already has rooms, tap Next, drag and rotate the room into place (it snaps to nearby walls), then tap Add to Floor Plan.
Typing exact lengths
- Lengths are inside sizes, from wall face to wall face.
- In metric you can type in m or cm. In imperial you type feet and inches.
- While you type, one end of the side stays where it is, marked with a pin. Tap the other corner to keep that one in place instead.
- Each side has to be at least 30 cm (12 in). If a length won't work for the shape, the keypad shakes and stays open.
- Dragged corners move in 1 cm (half-inch) steps.
Custom shapes
Pick Custom to draw any outline. Tap each corner, then tap the first corner to close the room. Corners land on a 25 cm (1 ft) grid, and you can undo or redo them. Once the room is closed you get the Room Size screen to set exact lengths, with a button to start over.
Add doors, windows and furniture on the plan after the room is created.
FAQ
What wall height does Draw It start with?
The most common wall height already on that floor. On an empty floor it starts at 2.6 m, or 8 ft 6 in if you use imperial units. You can change it on the Details screen.
Related articles
Still need help?
Email us at support@camplan.ai and we will get back to you.