How to scan a room with LiDAR
Tap Room in the floor plan toolbar, choose Scan Rooms (LiDAR), pick A room or A whole floor with multiple rooms, then tap Start Scanning and walk the room. Tap Done, check the summary and tap Add to Floor Plan. You need an iPhone or iPad with a LiDAR sensor.
Scan a room
- Open a project and tap Room in the toolbar.
- Choose Scan Rooms (LiDAR) and tap Next.
- Pick A room or A whole floor with multiple rooms, then tap Next.
- Go through the short tips (close the doors, let the light in) and tap Start Scanning.
- Move slowly and pan across each wall so every corner, door and window is visible. Tap Done when you're finished.
- Check the summary (Rooms, Area, Furniture) and tap Add to Floor Plan. If the floor already has rooms, tap Next, drag and rotate the new rooms into place (they snap to nearby walls), then tap Add to Floor Plan.
Scan a whole floor
With A whole floor with multiple rooms, each room is its own scan. Tap Scan first room / section, then Next room for each room next to the last one, so they connect. Scanning something twice is fine. When you're done, tap Finish, then Finish scanning, and the rooms are merged into one floor plan.
What gets captured
The scan picks up walls, doors, windows, openings and furniture. Once the rooms are on your plan, you can edit them like any other room.
Devices and limits
- LiDAR scanning needs an iPhone or iPad with a LiDAR sensor. The app names iPhone 12 Pro and newer Pro iPhones, and iPad Pro from 2020 on. Other devices get a Device Not Supported message.
- No LiDAR? Use Scan Rooms (AI), which builds the plan from a walkthrough video. See video to floor plan.
- Free accounts get a few LiDAR scans to try it. A whole-floor session counts as one scan, and scans you discard don't count. Paid plans have no scan limit. See plans.
FAQ
Why does the app say Try again! after a scan?
The scan came back empty, or a room couldn't be merged with the rooms you already scanned. Tap Try Again to scan it again. In a whole-floor scan, the rooms that already merged are kept.
The scanner says CamPlan needs camera access. What do I do?
Tap Settings and allow camera access for CamPlan, then start the scan again.
Related articles
Still need help?
Email us at support@camplan.ai and we will get back to you.